Convergint be conducting fire alarm testing in Dryden Hall and Hovland Hall May 9, 2024 between 10:00 am -3:30 pm.  The testing for the alarm will be around 10:00 am with the remainder of the devices commencing after that.  The testing will be brief and include both sounding of alarms and strobes.

For questions or comments on this closure, contact  Alarm Shop at 541-737-6626.

This is an update on the  Jen-Hsun Huang & Lori Mills Huang Collaborative Innovation Complex.

Truck traffic and activity will increase on SW 26th St. from SW Western Blvd. to NW Monroe Ave. on Monday, May 13 and Tuesday, May 14. Construction will begin on a tower crane that will be built within the fenced construction site and operate throughout the duration of the project.

What to know about the tower crane

The tower crane will be actively working on a daily basis in a highly visible location. While the crane boom radius does extend over Monroe Ave., the CEOAS Admin Building and Johnson Hall, crane loads will NOT be lifted over these areas for safety reasons.

When the crane is unmanned and inactive, building occupants and those in the surrounding area may notice the crane boom swinging back and forth in a freely moving, “weathervane” state. While this may appear concerning, it is actually an important safety requirement that allows the crane to remain stable in windy conditions.

For questions or comments on this closure, contact Construction Manager Jason Lundy at (541) 270-0193.

As part of the Richardson Hall Chiller & Controls Replacement project, a section of the Richardson Hall parking lot will be closed from Thursday, May 2 through Friday, May 3. The closed section will be located at the north end of the parking lot, directly east of Richardson Hall. The closure is necessary to allow for the installation of temporary, trailer-mounted chillers.

Other possible impacts include noise near the worksite.

A closure marked at the north end of the Richardson Hall parking lot, on the east side of the building.

For questions or comments on this closure, contact Construction Manager Justin Fuszek at (541) 740-5260.

This is an update to previous notification.

SW Campus Way between 26th St. and Memorial Place will remain closed through Saturday, April 27 to allow completion of the current phase of construction. The road, sidewalk and bike lanes will then be reopened through Sunday, May 5th.

The south entrance of Kelley Engineering Center will remain closed.

Intermittent closures and construction activity in the area will resume on Monday, May 6th.

For questions or comments on this closure, contact Construction Manager Justin Fuszek at (541) 740-5260.

This is an update on the Jen-Hsun Huang and Lori Mills Huang Collaborative Innovation Complex project.

The project site is located between Johnson Hall and NW Monroe Avenue and is bordered by SW 26th St. on the west and SW Memorial Place on the east.

Construction activity in the area will significantly increase starting Monday, April 29. Occupants of neighboring buildings and those traveling through the area should expect an increase in truck traffic and other activity, including an increase in construction-related noise.

A map of the Jen-Hsun Huang & Lori Mills Huang Collaborative Innovation Complex construction site.

For questions or comments on this closure, contact Construction Manager Jason Lundy at (541) 270-0193.

As part of the Building Controls and Mechanical Renewal project, power will be shut down to Richardson Hall building-wide so that building controls can be replaced starting Friday, April 26 at 5:00pm, ending Saturday, April 27 at 8:00 am. All equipment on emergency power will be energized through the shutdown and lab spaces will maintain minimal ventilation.

What do you need to do to prepare for this outage? Please make sure that all computers, printers, copiers and other electronic devices are turned off prior to Friday, April 26 at 5:00pm. If you have an Uninterruptable Power Supply (UPS), also known as a battery back-up, please be sure to turn it off as well.  Also, please ensure that all fume hoods are closed before leaving labs.

For questions or comments on this closure, contact Construction Manager Justin Fuszek at (541) 740-5260.  

As part of the Pride Center Renovation project, the sidewalk south of the Pride Center along SW A Ave. will be closed Friday, April 26, 7:00am -4:00pm. Pedestrians will be detoured to the south side of SW A Ave.

In addition, there will be intermittent impacts to traffic on SW 16th St and SW May Ave due to the delivery of materials from Wednesday, April 24 until Friday, April 26, 7:00am-4:00pm.

Sidewalk Closure:

Sidewalk closure on the south side of the Pride Center along SW A Avenue. Pedestrian detour is alomg the south side of SW A Avenue.

Intermittent road impacts:

Intermittent impacts on SW May Way and SW 16th St due to deliveries for construction

For questions or comments on this closure, contact Construction Manager Scylise Little

Please note: this will NOT be a continuous closure. Expect to see multiple, short-term closures, with the area being reopened for use in between. These short-term closures will be ongoing through June 8.

As part of the Kelley District Utility Plant project, intermittent closures will occur on Campus Way between 26th St. and Memorial Place, starting Monday April 22 through Saturday, June 8. The closures are necessary to allow for crane activity related to the project.

The Kelley Engineering Center south entrance will also be closed.

The north sidewalk and both bicycle lanes in this section of Campus Way will be closed intermittently during this time period. The south sidewalk will remain open for pedestrians. A bicycle detour will be provided.

The map shows a road and sidewalk closure on SW Campus Way between SW 26th St. and SW Memorial Place. The south entrance to Kelley Engineering Center is marked as closed. The north sidewalk is marked as closed. The south sidewalk is marked as open for pedestrians.
The map shows a bicycle detour along 26th St. to the walkway on the south side of Milam Hall to Memorial Place.

For questions or comments on this closure, contact Construction Manager Justin Fuszek at (541) 740-5260.

As part of the Jen-Hsun Huang & Lori Mills Huang Collaborative Innovation Complex project, Kelley Engineering Center will be closed to allow for a planned power outage on Tuesday, April 23 from 4:00 – 8:00 A.M. The outage is necessary to establish temporary electrical service for construction at the Huang Collaborative Innovation Complex site.

What do you need to do to prepare for this outage? 
Please make sure that all computers, printers, copiers and other electronic devices are turned off prior to Tuesday, April 23. If you have an Uninterruptable Power Supply (UPS), also known as a battery back-up, please be sure to turn it off as well. 

For questions or comments on this closure, contact Construction Manager Jason Lundy at (541) 270-0193.