CTD Cast

CTD stands for conductivity, temperature and depth. These terms refer to the changing seawater characteristics that the CTD array encounters as it descends. It electrically sends continuous measurements back to the ship.

Conductivity is an electrical measurement of salinity. The salinity varies near the surface, but is a reliable 34 to 35 parts per thousand for most of the descent. The seawater temperature drops to about 3 degrees Celsius, about 37 degrees Fahrenheit.

We dropped the cabled CTD to just above the seafloor depth of 1500 meters (4921 feet). The pressure increases about one atmosphere for every 10 meters (or ~33 feet) of depth. We attached to the CTD array two nylon bags filled with Styrofoam cups, decorated by students from the Lincoln County School District. When subjected to pressure 150 times greater than standard atmospheric, the air is squeezed out from the Styrofoam.

Second Day at Sea

The Abalones are in the foreground; the Cascadians are lined up in the back.

Yesterday, we deployed three seismometers, two “Abalones” from Scripps Institute of Oceanography with the trawl resistant design and one from the Lamont-Doherty Earth Observatory (LDEO) called “Cascadian” which also has an absolute pressure gauge and hydrophone. These seismometers are generally deployed deeper along the continental margin.

 

Ocean Bottom Seismometers

There are two sets of Ocean Bottom Seismometers (OBS), 10 were built by Lamont-Doherty Earth Observatory (LDEO) and include pressure gauges. The pressure gauges are for sensing vertical seafloor uplift and will be deployed on the edge of the continental margin to detect strain accumulation between the North American and Juan de Fuca plates. The remaining 15 OBS were built by Scripps Institute of Oceanography and are designed to be trawl resistant. Called “Abalones” they are pyramidal shaped and can be deployed from 100 m to 6000 meters depth.

Sea Grant's Bill Hanshumaker chronicles ocean research missions