Inside the Sounds of ‘Saving Atlantis’

What does it take to create the sound edit and design elements of a feature documentary? Answer: a lot of different samples, plugins, speakers, and most importantly, patience.

August 24, 2018

What does it take to create the sound edit and design elements of a feature documentary? Answer: a lot of different samples, plugins, speakers, and most importantly, patience. Here I’ll share a crash-course outline of the process I took to go from Adobe Premiere project to finished sound mix for our 2018 film, Saving Atlantis.

An overview of the entire project in Logic Pro X.

Here’s a quick overview of some of the gear we relied on over the course of the process:

  • DAW: Logic Pro X. This pick made sense for our unit when I came on in 2016, when our audio budget was minimal and we liked the flexibility offered by the array of native plugins.
  • Audio Interface: UAD Apollo 8 Duo. Using hardware emulations from Universal Audio gave us a substantial boost in production quality, whether I was trying to increase the clarity of an element that was supposed to sound natural, or trying to effect a sound to fit in with a specific subset of uniquely colored sounds. The fact that we were able to offset the DSP onto the hardware of the Apollo allowed this project to stay nimble and responsive, something I would have otherwise expected to see get bogged down with a project of this size. With the addition of a UAD Satellite Quad this project still only uses about 71% of the available DSP with the plugins I used.
  • Sound Editor: Izotope RX6 Advanced. We used this to repair audio that had any range of common issues you run into in documentary filmmaking, such as windy plosives, clicky vocals, high noise floors, and noisy recording environments.
  • Monitors: Tascam VL-S5’s. This was another early selection to keep costs down; however to their credit they’ve led me to produce reasonably translatable results.

The chronology of the process was a tricky thing to determine early on because there were so lingering unresolved elements of the film edit. I won’t go into the details of how many revisions the film edit saw after “picture lock” (note the ‘TIME SHIFT 1/2/3’ markers in the project window), but generally the film still followed the steps of:

  1. Sound Design
  2. Sound Edit
  3. Sound Mix

The sound design elements were added at any various stage of the process. Some of it was added by the editors for effect early on, some of it when I first stepped in, and some even after the mix was done. This was determined by the revisions that were applied after the first round of screenings was completed, such as footage or music we couldn’t get clearance on. Sound design (or “editing,” depending on who you talk to) is the most challenging part of the process for me since that hasn’t historically been my emphasis and I don’t have a very extensive library of sounds to draw from. You can only get away with using the same WAVES_CRASHING.wav samples so many times. Some SFX were recorded on locations with a Zoom H4n. Many SFX were sourced from open source libraries, where there can be quite a few high-quality samples when you filter search results by sample rate.

When I jumped into the task of approaching the overall edit, I was bouncing back and forth between using Logic and Izotope RX6. Unfortunately, my job required quite a bit of organizational work up front since we were unable to successfully export a functioning .AAF/.OMF file from the project in Adobe Premiere (I still don’t know why, and the time I spent forum-diving was fruitless).

My suggestion to the editors at that point was to organize all the character dialogue onto the same audio tracks, the music onto its own respective tracks, and the SFX onto their own separate tracks as well. This also meant that all of the volume automation and gain changes across separate regions in Premiere had to be reset or manually removed and normalized. These tracks were all individually exported from Premiere as ‘stems’ that I imported into Logic along with an export of the full film in stereo, immediately SMPTE locked and got to work splitting regions and categorizing onto tracks and into track stacks. Color coding regions was essential for this part of the process: visual tastes aside, the utilitarian advantages offered by chromatically indicating which regions contain what kinds of information are indispensable.

An unnatural-sounding interview recording of KAUST student Mohammad Binsarhad warranted a longer audio FX chain. The UAD Teletronix LA-2A works just as well for spoken vocals as it does singing vocals. The Pultec Pro Legacy plugin did the heavy lifting of shaping the vocals’ presence, and Logic’s parametric EQ helped eliminate any lingering tanky qualities. Finally, the UAD Oxford Inflator brought some brightness and warmth to the audio which allowed it to sit on top of a drone/ambient music track without any sidechain compression.

I allocated a track for every unique audio source. For the English mix, that meant that every character had a track; if their interviews were recorded in two or three different locations, they had multiple. For the Spanish dubs mix, I created a new track only for every speaker who recorded parts for characters. Our Spanish voice talent would read for multiple characters since a unique reader for each character would have been unreasonable.

The music tracks had a little less reason behind their organization. I started off with two or three to keep overlap separate between tracks that had long fades, and then created new tracks for each song that needed unique processing. For example, some songs needed specific attenuation of sub-bass frequencies while many others sat in the mix better with a wide ~5dB reduction around 1-2kHz. A couple lower-quality music tracks required a more intensive approach, where I used parallel processing techniques and the UAD Little Labs VOG plugin to give them a fuller feel.

One of our soundtrack cues had a unique problem where the beginning of the track was cut off by a late fade-in. I had to dive in and try and emulate the sound of the opening piano line with software instruments and plugins.
To achieve the washy, spacious character of the source track’s piano, I used UAD’s Ampex ATR-102 tape simulator to apply some chorus and their emulation of the Lexicon 224 unit to douse it with reverb.

The SFX tracks were the most sprawling of all since each sample typically needed customized attention to get it to sit in the mix properly. Most of the time, basic compression and EQ was necessary to get them to live in the same space as everything else, and a subsequent reduction of levels so that they remained present without distracting from the principal elements of the mix.

Overall, this process followed a similar form that most of my audio post work involves when working on pieces for Oregon State Productions, but at a much larger scale. It’s been laborious but highly rewarding to have the opportunity to work on my first feature documentary as the audio lead. I’m sure I’m still making my share of rookie mistakes, but I look forward to learning more with every new project that comes our way.

-Daniel Cespedes

TAGS:

CATEGORIES: Multimedia Projects

1,071 thoughts on “Inside the Sounds of ‘Saving Atlantis’”

  2. The Tech Explore Is A Professional Blogging Platform Where You Can Read A Lots Of Articles and Blogs Related To Blogging, Technology, Business, Health & Fitness, etc… And Where You Can Get Many Best Amazon Deals.

  5. After reading, I found it to be really informative. You have my gratitude for taking the time and making the effort to compile this information for me. I’ve discovered that I’m spending much too much time reading and commenting on other people’s blogs once again. But, hey, it was still worth it in the end!

    From- Sarkari Exams

  9. I felt the best thing about you is that you are living life according to your heart, not everyone gets such an opportunity.

    Wow, cool post. I’d like to write like this too taking time and real hard work to make a great article. cool post

  28. Garlic Bhindi ki Sabzi in hindi Friends, today I am going to share with you another very funny recipe of Bhindi, whose name is Garlic Bhindi. We can make Bhindi in many ways, Bhindi is very tasty to eat and gets ready very soon. Bhindi is one such vegetable which everyone likes to eat. We have shared many other recipes of Bhindi with you in the past, if all of you liked that recipe of Bhindi very much, then let’s make today the best Garlic Bhindi in the test.

    Bhindi ki Sabji

  31. Grab the best living experience opportunity in Godrej Three Park new residential Apartments. Offers the 2. 3 & 4 BHK flats, lifetime amenities, and other social conveniences in Ashok vihar, Delhi.

  33. Wow! nice article thanks for a informative article . Are you looking for the flats in Gurgaon? conscient hines elevateoffers 3 BHK Apartments available in Rs. 2.80 Crore, with lifestyle amenities, modular kitchen and high end features. Locate in sector 59, Gurgaon.

  39. shopegy is a shopping website where you can find beautiful high quality products under one roof. Our main focus is to offer you best quality products at agreeable prices. We also want you to enjoy user experience that is simple, convenient, and secure at all times.

    shopegy

  49. There are some important considerations when buying a domain name. For example, if the person who will buy the domain name will use it for the corporate company, then it will be beneficial to get the brand name. It is not a desired and preferred situation for the domain, which is important to create brand awareness, to be different from the name of a known brand.more web hosting in kerala

Comments are closed.