Primary construction activities for the week of 07/01 thru 07/05 will consist of the following:  

|   * = Start or Finish was delayed    |   ** Activity taking longer than projected   |

• ROOFING
• High Roof Auditorium:
• Continue to form and pour evacuation ramp and eyebrows
• Low Roof Auditorium:
  • Continue installing roof
• Lab Wing Main Roof:
  • Continue installing hot fluid-applied rubber asphalt (tying to exterior walls)
• Penthouses:
• Lab High Roof West:
  • Continue installing roof

• FRAMING SHEATING (2^nd & 3^rd Floor)
• Lab Wing – South Elevation:
  • Finish installing temp window protection (if needed) *

• FRAMING SHEATING (1^st Floor)
  • Lab Wing – South Elevation:
  • Install flashings and window steel
• Auditorium – North Elevation:
  • Finish installing steel studs
  • Start installing exterior gyp
• Auditorium – East Elevation:
  • Start installing flashings, window steel, and temp window protection (if needed)
    • Auditorium – South Elevation:
  • to install window steel and flashings**
• Auditorium – West Elevation:
  • Finish Installing weather barrier, window steel, and flashings

• WINDOWS & SIDING
• Lab Wing – West Elevation:
  • finish installing vertical siding
• Lab Wing – North Elevation:
  • Continue installing vertical siding and windows

• Lab Wing – East Elevation:
  • Continue installing vertical siding
  • Installing windows
  • Start installing backer rod and caulk and vertical wood cladding *
• Lab Wing – South Elevation:
  • Continue installing windows, flashings & trim, and horizontal cleat
• Auditorium – East Elevation:
  • Finish installing windows and vertical Z girt
• Auditorium – South Elevation:

• Auditorium – West Elevation:
  • Finish installing vertical Z girt and install windows flashings and trim

• INTERIOR BUILDOUT
• Mechanical & Back of House:
  • Install panels/feeders in electric rooms and place all house keeping pads.
• Lab Wing Level 2 – Rough-in:
  • Install MEP in walls
  • Finish Stuff and spray for STC’s

• SITE IMPROVEMENTS
• ODF&W Parking and Sidewalks:
  • Fine grade the parking lot to be ready for asphalt
  • Excavating for Rain Garden #2 *

Primary construction activities for the week of 07/01 thru 07/05 will consist of the following:

|   * = Start or Finish was delayed    |   ** Activity taking longer than projected   |

• ROOFING
• High Roof Auditorium:
• Continue to form and pour evacuation ramp and eyebrows
• Low Roof Auditorium:
  • Continue installing roof
• Lab Wing Main Roof:
  • Continue installing hot fluid-applied rubber asphalt (tying to exterior walls)
• Penthouses:
  • Installing water barrier
• Lab High Roof West:
  • Continue installing roof

 

• FRAMING SHEATING (2^nd & 3^rd Floor)
• Lab Wing – South Elevation:
  • Finish installing temp window protection (if needed) *

 

• FRAMING SHEATING (1^st Floor)
  • Lab Wing – South Elevation:
• Continue to install temp window protection where needed

• Auditorium – North Elevation:
  • Finish installing steel studs
  • Start installing exterior gyp
• Auditorium – East Elevation:
  • Start installing flashings, window steel, and temp window protection (if needed)
    • Auditorium – South Elevation:
  • Continue to install window steel and flashings**
• Auditorium – West Elevation:
  • Installing weather barrier, window steel, and flashings

 

• WINDOWS & SIDING
• Lab Wing – West Elevation:
  • finish installing vertical siding
• Lab Wing – North Elevation:
  • Continue installing vertical siding and windows

 

 

 

 

• Lab Wing – East Elevation:
  • Continue installing vertical siding
  • Installing windows
  • Start installing backer rod and caulk and vertical wood cladding *
• Lab Wing – South Elevation:
  • Continue installing windows, flashings & trim, and horizontal cleat
• Auditorium – East Elevation:
  • Start installing windows and vertical Z girt
• Auditorium – South Elevation:
  • Continue installing vertical Z girt

 

• INTERIOR BUILDOUT
• Mechanical & Back of House:
  • Finish painting top out for MEP to start, start installing panels/feeders in electric rooms and place all house keeping pads.
• Lab Wing Level 2 – Rough-in:
  • Install MEP in walls
  • Finish installing gyp top out one side of walls at duct locations
  • Continue tape and finish one side top out

 

• SITE IMPROVEMENTS
• ODF&W Parking and Sidewalks:
  • FRPS west and south curbs
  • Excavating for Rain Garden #2 *

 

Primary construction activities for the week of 07/01 thru 07/05 will consist of the following:

|   * = Start or Finish was delayed    |   ** Activity taking longer than projected   |

• ROOFING
• Low Roof Auditorium:
  • Start installing roof
• Lab Wing Main Roof:
  • Continue installing hot fluid-applied rubber asphalt (tying to exterior walls)
• Penthouses:
  • Installing water barrier
• Lab High Roof West:
  • Continue installing roof

 

• FRAMING SHEATING (2^nd & 3^rd Floor)
• Lab Wing – South Elevation:
  • Finish installing temp window protection (if needed) *

 

• FRAMING SHEATING (1^st Floor)
  • Lab Wing – South Elevation:
• Installing window steel at head & sill, flashings, and air & water barrier

• Auditorium – North Elevation:
  • Finish installing steel studs
  • Start installing exterior gyp
• Auditorium – East Elevation:
  • Start installing flashings, window steel, and temp window protection (if needed)
    • Auditorium – South Elevation:
  • Continue installing air & water barrier, window steel, and flashings **
• Auditorium – West Elevation:
  • Finish installing steel studs **
  • Start installing exterior gyp *

 

• WINDOWS & SIDING
• Lab Wing – West Elevation:
  • Continue installing vertical wood cladding
• Lab Wing – North Elevation:
  • Continue installing vertical wood cladding and windows

 

 

 

 

• Lab Wing – East Elevation:
  • Finish installing horizontal cleat (pulled off to go to South side) *
  • Installing flashings and trim
  • Start installing backer rod and caulk and vertical wood cladding *
• Lab Wing – South Elevation:
  • Continue installing windows, flashings & trim, and horizontal cleat
• Auditorium – East Elevation:
  • Start installing windows and vertical Z girt
• Auditorium – South Elevation:
  • Continue installing vertical Z girt

 

• INTERIOR BUILDOUT
• Mechanical & Back of House:
  • Finish installing gyp top out & electrical rooms, tape & finish one side top out, stuffing and spraying for STC’s, sound board at OTS ceilings, and extending down rods
• Lab Wing Level 2 – Rough-in:
  • Finish installing gyp top out one side of walls at duct locations
  • Continue installing MEP in Labs
  • Start tape and finish one side top out

 

• SITE IMPROVEMENTS
• Mechanical Enclosure M0101:
  • Setting Generator and ACCH-101

 

• ODF&W Parking and Sidewalks:
  • Start installing rebar for sidewalks and mono curbs *
  • Excavating for Rain Garden #2 *

Primary construction activities for the week of 06/24 thru 06/28 will consist of the following:

|   * = Start or Finish was delayed    |   ** Start or Finish postponed   |

• ROOFING
• Evacuation Ramp:
  • Install expansion joint and trench drain
  • Install hot rubber roofing (moved to Lab to strip in)
• Lab Wing Main Roof:
  • Continue installing hot fluid-applied rubber asphalt (tying to exterior walls)
• Penthouses:
  • Finish installing framing *
  • Start installing sheathing *
• Lab High Roof West:
  • Continue installing roof

 

• FRAMING SHEATING (2^nd & 3^rd Floor)
• Lab Wing – South Elevation:
  • Finish installing temp window protection (if needed)

 

• FRAMING SHEATING (1^st Floor)
  • Lab Wing – West Elevation:
• Finish installing window steel at head & sill, flashings, air & water barrier, and temp window protection (if needed)*
  • Lab Wing – East Elevation:
• Finish installing temp window protection (if needed) *
  • Lab Wing – South Elevation:
• Start installing exterior gyp
• Start installing air & water barrier, flashings, and window steel at head & sill

• Auditorium – North Elevation:
  • Continue installing steel studs
    • Auditorium – South Elevation:
  • Installing air & water barrier, window steel, and flashings
• Auditorium – West Elevation:
  • Installing steel studs
  • Start installing exterior gyp

 

 

 

• WINDOWS & SIDING
• Lab Wing – West Elevation:
  • Continue installing vertical wood cladding
• Lab Wing – North Elevation:
  • Continue installing vertical wood cladding and windows
• Lab Wing – East Elevation:
  • Finish installing horizontal cleat
  • Installing flashings and trim
  • Start installing backer rod and caulk * and vertical wood cladding
• Lab Wing – South Elevation:
  • Finish installing vertical Z girt
  • Continue installing windows
  • Start installing flashings and trim
• Auditorium – South Elevation:
  • Start installing vertical Z girt

 

• INTERIOR BUILDOUT
• Mechanical & Back of House:
  • Start stuffing and spraying for STC’s **
  • Start tape and finish one side top out
• Lab Wing Level 2 – Rough-in:
  • Finish framing walls (starting at E/3 clockwise)
  • Continue installing MEP in Labs
  • Start installing gyp top out one side of walls at duct locations

 

• SITE IMPROVEMENTS
• Mechanical Enclosure M0101:
  • Finish forming sidewalks & steps and placing sidewalk and steps
• ODF&W Parking and Sidewalks:
  • Start forming sidewalks and mono curbs *
  • Importing rock & rough grade and excavating for Rain Garden #2

 

Primary construction activities for the week of 06/17 thru 06/21 will consist of the following:

 * = Start or Finish was delayed

• ROOFING
• Evacuation Ramp:
  • Finish Hot rubber roofing *
  • Form and install foam at 1^st 3^rd of the Ramp
• High Roof Auditorium:
  • Start installing zinc roofing
• Low Roof Auditorium:
  • Continue installing foam into Epic deck, insulation, and cover board
• Lab Wing Main Roof:
  • Continue installing hot fluid-applied rubber asphalt (tying to exterior walls)
• Penthouses:
  • Finish installing framing *
  • Start installing sheathing *
• Lab High Roof West:
  • Continue installing roof

 

• FRAMING SHEATING (2^nd & 3^rd Floor)
• Lab Wing – South Elevation:
  • Finish installing air & water barrier
  • Continue installing flashing at pop outs, window steel at pop outs
  • Start installing temp window protection (if needed)

 

• FRAMING SHEATING (1^st Floor)
  • Lab Wing – West Elevation:
• Finish installing window steel at head & sill, flashings, air & water barrier, and temp window protection (of needed)*
  • Lab Wing – North Elevation:
• Finish installing window steel at window head & sill, flashings, and air & water barrier, and temp window protection (if needed) *
  • Lab Wing – East Elevation:
• Finish installing window steel at window head & sill, flashings, and air & water barrier
• Start installing temp window protection (if needed) *
  • Lab Wing – South Elevation:
• Continue installing steel studs

 

 

• Auditorium – North Elevation:
  • Continue installing steel studs
    • Auditorium – South Elevation:
  • Finish installing steel stud floor clips *
  • Continue installing steel studs *
• Auditorium – West Elevation:
  • Finish installing steel stud floor clips *
• Innovation Lab:
  • Installing window steel

 

• WINDOWS & SIDING
• Lab Wing – West Elevation:
  • Continue installing vertical wood cladding
• Lab Wing – North Elevation:
  • Continue installing insulation & horizontal cleat, flashings & trim, vertical wood cladding, and windows
• Lab Wing – East Elevation:
  • Installing flashings and trim
  • Start installing backer rod and caulk
• Lab Wing – South Elevation:
  • Start installing vertical Z girt and windows

 

• INTERIOR BUILDOUT
• Mechanical & Back of House:
  • Finish installing in-wall MEP at Electrical Rooms *
  • Finish installing gyp top out *
  • Start stuffing and spraying for STC’s
• Lab Wing Level 2 – Rough-in:
  • Continue installing MEP in Labs
  • Continue framing walls (starting at E/3 clockwise)

 

• SITE IMPROVEMENTS
• Mechanical Enclosure M0101:
  • Stripping retaining walls, damp proofing walls, back filling walls, and forming sidewalks & steps
  • Start placing sidewalk and steps at EOW
• ODF&W Parking and Sidewalks:
  • Finish excavating for Public Rain Garden*
  • Finish balance of storm work *
  • Installing pole base and electrical for exterior light poles
  • Start forming sidewalks and mono curbs