Monthly Archives: May 2020

5/28-7/8/2020: HVAC heat pump system shutdown at Research Way Lab Building

Posted on by

As part of the Research Way Lab Building Renovation Project, the HVAC heat pump system will be shut down in order to upgrade existing equipment, install new equipment and commission the entire building system. This work affects the cooling and heating of building spaces. There will be no heating or cooling throughout the building for this duration. Temporary accommodations have been made for current building tenants, SIGA and the Keck Lab / CEOAS.

For questions or comments on this closure, contact Construction Manager Amy Keene at 541-214-1038.

Map for Research Way Lab Building

5/21/2020: No closure, construction traffic along NW 27th St. for Burt Hall II work

Posted on by

As part of the Burt Hall II Fire Renovation Project, a crane will be on site along NW 27th Street on Thursday, May 21, 2020 to hoist mechanical curbs onto the roof of Burt Hall II, and a flatbed truck will be on site with equipment curbs. This is for informational purposes only. Intermittent flagging related to construction traffic and occasional noise should be the only impact.

For questions or comments on this closure, contact Construction Manager Jason Lundy at 541-270-0193.

Map of area for Burt Hall II Fire Renovation Project

5/4/2020: Fire alarm shutdown for Research Way Lab Building

Posted on by

As part of the Research Way Lab Building renovation project, on Monday, May 4, 2020, the electrical sub-contractor, EC, will be shutting down the fire alarm panel from 7 a.m. to 12 p.m., to re-route the existing fire alarm to make room for the new panel. Andersen Construction will be providing fire watch throughout the building during this period. Occupants will be notified once the existing system is back online.

For questions or comments on this closure, contact Construction Manager Amy Keene at 541-214-1038 or Project Manager John Doty at 541-740-8302.

Map of Research Way Lab Building location